Profile

Anonymous Member

Contact Details

My Content

1 to 20 of 46 total

Electrodynamic Vibration Tables

Posted By Anonymous Member 06-05-2026 11:11 AM
Found In Egroup: All Member Forum \ view thread
This message was posted by a user wishing to remain anonymous My companies R&D packaging lab has potential opportunity to relocate our lab into another space/building. We currently have a hydraulic Lansmont vibration table in our current lab. If we were to move to a new space, we would preferably want ...

Wax Coated paper corrugated boxes

Posted By Anonymous Member 05-26-2026 11:00 AM
Found In Egroup: All Member Forum \ view thread
This message was posted by a user wishing to remain anonymous My packaging distributor company is in need of a box manuf that can offer a wax coated single wall corrugated box. Also needs to be printed up to (2) colors. Drawings and photographs available. Prefer the manuf to be in the Southeast. Truck ...

Next Chicago Chapter event

Posted By Anonymous Member 02-17-2026 08:15 AM
Found In Egroup: Chicago Chapter \ view thread
This message was posted by a user wishing to remain anonymous I have not seen any emails, updates, or sponsored events by the Chicago Chapter for a couple years. Is the Chapter still active? Why no activity for what used to be the top chapter in the nation? -------------------------------------- ...

Request: Supplier Onboarding Templates & PM Frameworks for Small Teams

Posted By Anonymous Member 01-22-2026 12:16 PM
Found In Egroup: All Member Forum \ view thread
This message was posted by a user wishing to remain anonymous Hello fellow IOPP members, As our team grows and we're scaling new packaging programs, I'm looking to establish repeatable processes for bringing on strategic supplier partners. Given our small team size, I'm hoping to learn from ...

ASTM D7611/D7611M-20 Standard Practice for Coding Plastic Manufactured Articles for Resin Identification

Posted By Anonymous Member 11-19-2025 05:09 PM
Found In Egroup: All Member Forum \ view thread
This message was posted by a user wishing to remain anonymous Can anyone share the new ASTM standard for resin codes? (ASTM D7611/D7611M-20) -------------------------------------------

Are cross dock warehouses swapping my good GMA pallets with bad ones?

Posted By Anonymous Member 11-18-2025 11:52 AM
Found In Egroup: All Member Forum \ view thread
This message was posted by a user wishing to remain anonymous My unit loads are arriving at my customer's dock no longer wrapped to the pallet. Furthermore, the pallets look like they are near end of life. My unsupported suspicion is that there has been some unauthorize pallets swaps taking place ...

Test Method PET Migration for Food & Beverage bottles and jars

Posted By Anonymous Member 11-10-2025 12:04 AM
Found In Egroup: All Member Forum \ view thread
This message was posted by a user wishing to remain anonymous Please assist with a test method to follow for MIGRATION TESTS for rigid PET Jars and Bottles for Food & Beverage contact. Thanks -------------------------------------------

Crate testing ASTM D4169

Posted By Anonymous Member 11-07-2025 07:47 PM
Found In Egroup: All Member Forum \ view thread
This message was posted by a user wishing to remain anonymous Hi All , I wanted to know for capital equipments that typically get shipped in crates , do we need to perform ASTM D4169 on the whole crate system or would testing individual accessories and components in their corrugated boxes ...

Metal pocket size cans

Posted By Anonymous Member 11-07-2025 10:40 AM
Found In Egroup: All Member Forum \ view thread
This message was posted by a user wishing to remain anonymous Hello All, We are looking for metal container/can suppliers especially for pocket size. Any leads and contacts will be appreciated. Thank you. -------------------------------------------

Solvent Pen Packaging

Posted By Anonymous Member 08-07-2025 04:33 PM
Found In Egroup: All Member Forum \ view thread
This message was posted by a user wishing to remain anonymous Hello! I am looking into a project to package a solvent in a pen form with a felt tip. Ideally, it could be a double-sided package where I could put another solvent product in the other end with a threaded tip. Any recommendations on ...

RE: Looking for input regarding sample sizes

Posted By Anonymous Member 08-01-2025 06:34 PM
Found In Egroup: All Member Forum \ view thread
This message was posted by a user wishing to remain anonymous Dear anonymous, that depends on your industry, sample size, design requirements, risk thresholds, etc. Is this an FDA regulated product involving higher risk levels? Sounds like that could be the case. That isn't stated in your question. ...

Looking for input regarding sample sizes

Posted By Anonymous Member 07-31-2025 01:09 PM
Found In Egroup: All Member Forum \ view thread
This message was posted by a user wishing to remain anonymous Hi All, Posting here regarding a sample size conundrum that I am facing. My company is looking to do simulated handling & distribution testing on a new packaging configuration. The magic number for sample sizes that is widely accepted ...

RE: Packaging equipment vendors

Posted By Anonymous Member 07-17-2025 05:07 PM
Found In Egroup: All Member Forum \ view thread
This message was posted by a user wishing to remain anonymous Link engineering has an awesome vibe table. They are fast to answer emails, and we have not had any major issues with the equipment.

Walmart & PDQ

Posted By Anonymous Member 06-25-2025 02:50 PM
Found In Egroup: All Member Forum \ view thread
This message was posted by a user wishing to remain anonymous Hi - does anyone know the history behind Walmart's PDQ program? When did it start?

RE: Temperature effect on Induction Seal

Posted By Anonymous Member 06-18-2025 08:13 PM
Found In Egroup: All Member Forum \ view thread
This message was posted by a user wishing to remain anonymous Hi Martin, I am glad to be connected to you and would be good to get your insight. Since the bottles are hand capped, these are then straightaway passed through the induction seal unit. Thanks

RE: Temperature effect on Induction Seal

Posted By Anonymous Member 06-18-2025 08:10 PM
Found In Egroup: All Member Forum \ view thread
This message was posted by a user wishing to remain anonymous Hi Robert, Thank you for your message. Here are my comments - So the process is when we receive the packaging, we store in the warehouse at ambient temperature. Once the product is scheduled for packing we bring ...

Temperature effect on Induction Seal

Posted By Anonymous Member 06-12-2025 08:21 PM
Found In Egroup: All Member Forum \ view thread
This message was posted by a user wishing to remain anonymous Hi All, I'm facing an issue with induction sealing on diamond-shaped bottles, and it seems to be specific to winter time. After the bottles are hand-capped and undergo the induction sealing process, the seals appear fine when checked ...

RE: Domestic Supplier for Coffee & Tea Filter Paper

Posted By Anonymous Member 04-21-2025 09:12 AM
Found In Egroup: All Member Forum \ view thread
This message was posted by a user wishing to remain anonymous Thank you for the replies, much appreciated

Domestic Supplier for Coffee & Tea Filter Paper

Posted By Anonymous Member 04-15-2025 03:36 PM
Found In Egroup: All Member Forum \ view thread
This message was posted by a user wishing to remain anonymous Was wondering if anyone has a domestic source to supply filter paper that would be used for coffee & tea?

New Best Practices for Accelerating Cost Savings Initiatives

Posted By Anonymous Member 02-02-2025 09:03 PM
Found In Egroup: All Member Forum \ view thread
This message was posted by a user wishing to remain anonymous Our procurement team has asked that we accelerate our supplier assessments and/or material qualifications for cost savings initiatives. I wanted to reach out to gather your feedback: 1. Are there any best practices, strategies, ...