All Member Forum

 View Only

  • 1.  Moulded Pulp Packaging Design Guidelines

    Posted 07-25-2022 08:00 AM
    Is there any documentation for the design guidelines that need to be followed for moulded pulp packaging design?


  • 2.  RE: Moulded Pulp Packaging Design Guidelines

    Posted 07-26-2022 11:14 AM
    I'm not 100% sure they have published free design guidelines, but it's worth checking. It is probably highly dependent upon which type of molded fiber you're using. Definitions of type are here: https://www.imfa.org/molded-fiber/ 

    Eric Carlson, CPP
    Senior Manager


    eric.carlson@chainalytics.com
    (612) 810-8315 mobile


    Connect with me on LinkedIn




    Original Message


  • 3.  RE: Moulded Pulp Packaging Design Guidelines

    Posted 07-27-2022 02:50 AM
    @Eric Carlson Thank you for your reply. This seems like more of a basic information about MPP. What I am looking for a detailed design guidelines like dimensional reference for wall thickness, depth of cavities based on processes, rib/gusset sizes etc.

    ---------------------------------
    Abhijeet Sahu CPP
    Assistant Manager-Packaging
    Havells India Limited
    Noida
    (+91) 8291711675
    ---------------------------------



    Original Message


  • 4.  RE: Moulded Pulp Packaging Design Guidelines

    Posted 07-27-2022 11:31 AM
    Abhijeet, I did some quick search of the ASTM catalog, but could not find anything, so if there is something out there, either it is held privately at the supplier, or the IMFA has info behind their member portal.
    Best of luck!

    Eric

    Eric Carlson, CPP
    Senior Manager


    eric.carlson@chainalytics.com
    (612) 810-8315 mobile


    Connect with me on LinkedIn




    Original Message


Related Content